The appearance and maintenance of the floor covering essentially depends on proper care and cleaning, as well as professional stain removal.
Care and cleaning.
Daily care by suction brushing or vacuuming ensures the removal of dust and loose dirt. Suction brushing is generally recommended only for short-pile carpets made of synthetic fibers, while vacuuming gives good results on all floor coverings with little wear.
Intermediate and partial cleaning occurs with liquid ones, with foaming carpet cleaners then, when only single fragments of the carpet are dirty. Cleaning agents are applied with a sponge or brush (by hand or machine).
As a relatively large amount of liquid penetrates the fabric, foam should be thoroughly vacuumed with a wet vacuum cleaner. For carpet flooring, worn loosely or secured with adhesive tape, this method is generally not suitable. Here you can clean with ready-made foam, which, however, must also be thoroughly sucked away.
Thorough cleaning is necessary from time to time, when the carpet is dirty over a larger area. When using this method, i.e. A lot of damage can be done by applying the liquid and spraying extraction. In any case, consult a specialist.
Shampooing and suction equipment can be rented. They should be used strictly according to the instructions for use, to avoid damage. First, the foam is applied and possibly rubbed onto the carpet with a cloth. After approx. After half an hour of exposure, the liquid is carefully sucked out.
After the carpet, if it is possible, you shouldn't walk, as long as it's wet.