In the case of a passive house, additional work to be done is this overlay 1-2 millimeter sealing layer on the outer and inner surfaces of the walls, because this building is undergoing the pressure test needed for the passivity certificate.
As for the scope …
Illmod trio and illmod trio FBA tape constitute a complete sealing system for the window-wall connection. Illmod trio expansion tape is used to secure side connections
and top in the window and the illmod trio FBA tape seals the bottom connection of the window. Illmod trio expansion tape is …
Duo window film belongs to intelligent films, changing their diffusion parameters depending on the temperature and humidity of the environment.
The technical properties of the foil allow for dynamic drying of the window and wall connection throughout the year.
The higher the relative humidity of the environment, the lower its vapor tightness …
Tremco illbruck constantly develops new solutions, which will ensure the increasing durability of the seal and keep it as dry as possible. The inspiration for such solutions are the comments of architects and window installers. The materials from which our products are made are also changing a …
Insulation from the inside of the outer walls of the ground floor and the floor on the ground of the passive building. Thermal resistance of the floor on the ground R = 10 (m2 • K)/W.
The material we use to insulate the floor on the ground is STROPROCK with a thickness of 10 + 8 cm. …
ECOROCK MAX seamless external wall thermal insulation system with a thickness 20 cm with additional wall insulation from the inside with ROCKTON boards of a thickness 10 cm. Insulation of the floor on the ground with STROPROCK boards with a thickness 10 + 8 cm.
The outer walls of the passive building remained …
The appearance and maintenance of the floor covering essentially depends on proper care and cleaning, as well as professional stain removal.
Care and cleaning.
Daily care by suction brushing or vacuuming ensures the removal of dust and loose dirt. Suction brushing is generally recommended …
Control mechanism "without separation of functions", used in fire ventilation cut-off dampers – current control.
In this case, the combined electromechanical rotary actuator is responsible for moving the damper to the safety position and its return to the waiting position. In the event of a fire detected by …
To end 2001 year, fire ventilation cut-off dampers were classified in the ITB Fire Test Laboratory on the basis of a fire test in "static conditions". In the smoke and gas extraction pipes, in all situations there is a negative pressure in relation to the protected zone. So a study …
Fixed water extinguishing devices are required in high-rise collective residence and public utility buildings – sprinkler or sprinkler systems. Fixed water extinguishing devices are devices that are permanently connected with the facility, containing their own supply of extinguishing agent, equipped …