Monthly Archives: November 2014

Errors in the installation of fire dampers

The most common assembly errors

The most common installation error, which in most cases result from ignorance or ignorance of the assembly and operating instructions of the manufacturers, belong:

– not keeping the border of the damper bricking, precluding the possibility of keeping the flap …

Building conditions that endanger people's lives

The basis for recognizing a building as being life-threatening is not ensuring the possibility of evacuating people in the event of a fire, which includes in particular:

1) passage width, access or emergency exit, either the flight or landing of the staircase used for evacuation, less than one …

Fire separations of the building

Walls and ceilings that are elements of fire separation, should be made of non-flammable materials, and their openings are enclosed with fire atriums or closed with fire doors, or another fire closure. The total area of ​​these openings if they occur in …

Laying a wooden floor on floor joists

Laying on floor joists
The professionally made bottom joist structure is covered with laminated boards of min. 22 mm thick or solid planks (grub. 26 mm). The laying process and construction of the floor surface are essentially similar to that described, floating stacking …

"Separation of functions" control mechanism with spring drive, used in cut-off fire dampers – current impulse control

In case of, when moving to the safety position, it is initiated by an electromagnetic release that releases the bolt of the damper spring drive, and transition to the standby position is ensured by an independently powered electromechanical rotary actuator, we say, that it is a "separated function" control mechanism solution for safety from …

Passive house technologies

In the case of a passive house, additional work to be done is this overlay 1-2 millimeter sealing layer on the outer and inner surfaces of the walls, because this building is undergoing the pressure test needed for the passivity certificate.

When it comes to the scope of work, there is no problem, …

I3 WINDOW INSTALLATION SYSTEM USING duo window film

Duo window film belongs to intelligent films, changing their diffusion parameters depending on the temperature and humidity of the environment.
The technical properties of the foil allow for dynamic drying of the window and wall connection throughout the year.
The higher the relative humidity of the environment, the lower its vapor tightness …

WINDOW SEALING SYSTEMS i3

Tremco illbruck constantly develops new solutions, which will ensure the increasing durability of the seal and keep it as dry as possible. The inspiration for such solutions are the comments of architects and window installers. The materials from which our products are made are also changing a …